Ge-industrial-solutions A Series Lighting Control Panelboards DB25 Connect Bedienungsanleitung PDF herunterladen

Series

Lighting Control Panel boards

DEH41092 Installation Instructions R02

WARNING: Danger of electrical shock or injury. Turn OFF power service

to the line side of the panel board or switchboard before working inside

the equipment or removing any component

. Equipment is to be installed

and maintained by properly trained and qualified personnel only.

Replacement of DB25 Connector cable

Catalog No. Qty. Description

SRCWIRE05 1 DB25 controller connection cable 5ft

SRCWIRE10 1 DB25 controller connection cable 10ft

SRCWIRE15 1 DB25 controller connection cable 15ft

SRCWIRE20 1 DB25 controller connection cable 20ft

SRCWIRE25 1 DB25 controller connection cable 25ft

Removal of Existing cables:

1. Ensure that Installer is properly grounded before working with controller box connections.

2. Remove the front cover and dead front of the Integrated switch board

3. Cut the tie wraps, which are used to route these cables and fastened to any of the support members or to the rails.

4. Remove DB25 cable connectors by unscrewing the self-retaining securing screws (2 per connector). Remove

controller connector first and then the back plane connector second. Procedure typical other side.

5. Make sure threaded stud on mating controller connector stays in place. If stud comes off with removal, remove

from the connector screw and re-insert and screw hand tight into controller DB25 terminal located inside the

controller box.

Reinstallation Instructions:

1. Connect one end on the DB25 connector cable to DB25 connector on back plane first and other end of the cable to

controller box DB25 connector.

2. Press the ends of the cables firmly and tighten four knurled screws of each cable ends to torque of 5-10 lb-inch.

3. Route the cables together and fastened them with tie traps where needed for proper securement.

4. Install the front cover & dead front of the Integrated Switch board

Back Plane

Connection point.

Typ right side

Back Plane

SRCWIRE05

SRCWIRE10

SRCWIRE15

SRCWIRE20

SRCWIRE25

Controller Connecto

Interior Section

External Controller section

GE Consumer & Industrial General Electric Company, Plainville, CT 06062



2004 General Electric Company DEH41092 R02

Inhaltsverzeichnis

Seite 1

A Series®Lighting Control Panel boards DEH41092 Installation Instructions R02 g

Weitere Dokumente für Ausrüstung Ge-industrial-solutions A Series Lighting Control Panelboards DB25 Connect

Um das Dokument anzuzeigen Ge-industrial-solutions A Series Lighting Control Panelboards DB25 Connect Bedienungsanleitung

Ge-industrial-solutions A Series Lighting Control Panelboards DB25 Connect Bedienungsanleitung (1 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Ge-industrial-solutions A Series Lighting Control Panelboards DB25 Connect Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung Ge-industrial-solutions A Series Lighting Control Panelboards DB25 Connect herunter. GE Industrial Solutions A Series Lighting Control Panelboards DB25 Connector cable User Manual [en] [es] [fr] Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Ausrüstung Ge-industrial-solutions A Series Lighting Control Panelboards DB25 Connect

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Ge-industrial-solutions A Series Lighting Control Panelboards DB25 Connect