Ge-industrial-solutions A Series Lighting Control Panelboards DB25 Connect Bedienungsanleitung PDF herunterladen

Series

Lighting Control Panel boards

DEH41090 Installation Instructions R02

WARNING: Danger of electrical shock or injury. Turn

OFF power service to the line side of the Panel board o

switchboard before working inside the equipment o

removing any component. Equipment is to be installed

and maintained by properly trained and qualified

personnel only.

Replacement of DB25 Connector cable L /R

Catalog No. Qty.

SRCWIREL 1

SRCWIRER 1

Removal of existing cables:

1. Ensure that the Installer is properly grounded before

working with controller box connections.

2. Remove the front cover & dead front of the Panel

board / Integrated Switch board.

3. Remove cable connectors by unscrewing the self-

retaining securing screws (2 per connector). Remove

controller connector first and then the back plane

connector second. Procedure typical to both right &

left sides.

4. Make sure threaded stud on mating controlle

connector stays in place. If stud comes off with

removal, remove from the connector screw and re-

insert and screw hand tight into controller DB25

terminal located inside the controller box.

Reinstallation instructions:

1. Cable connector ends have embossed lettering on

them defining LH (left Hand) or RH (Right Hand)

2. Connect one end on the DB25 connector cable to

DB25 pin connector on back plane first and other end

of the cable to controller box DB25 pin connector as

shown

3. Press the ends of the cables firmly and tighten fou

knurled screws of cable connector ends to torque o

5-10 lb-inch.

4. Install the dead front & front cover of the Panel board

/ Integrated Switch Board

CONTROLLER

CONNECTOR

BACKPLANE

ASRCWIREL

LEFT SIDE

CONTROLLER

CONNECTOR

BACKPLANE

ASRCWIRER

RIGHT SIDE

GE Consumer & Industrial General Electric Company, Plainville, CT 06062



2004 General Electric Company DEH41090 R02

Inhaltsverzeichnis

Seite 1

A Series® Lighting Control Panel boards DEH41090 Installation Instructions R02 g WARNING: Danger of elec

Weitere Dokumente für Ausrüstung Ge-industrial-solutions A Series Lighting Control Panelboards DB25 Connect

Um das Dokument anzuzeigen Ge-industrial-solutions A Series Lighting Control Panelboards DB25 Connect Bedienungsanleitung

Ge-industrial-solutions A Series Lighting Control Panelboards DB25 Connect Bedienungsanleitung (1 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Ge-industrial-solutions A Series Lighting Control Panelboards DB25 Connect Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung Ge-industrial-solutions A Series Lighting Control Panelboards DB25 Connect herunter. GE Industrial Solutions A Series Lighting Control Panelboards DB25 Connector cable L_R User Manual Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Ausrüstung Ge-industrial-solutions A Series Lighting Control Panelboards DB25 Connect

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Ge-industrial-solutions A Series Lighting Control Panelboards DB25 Connect