Ge-industrial-solutions A Series Lighting Control Panelboards Replacement Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung Ge-industrial-solutions A Series Lighting Control Panelboards Replacement herunter. GE Industrial Solutions A Series Lighting Control Panelboards Replacement of Back plane User Manual Benutzerhandbuch

Removal of Existing Back Plane Assembly:

1. Ensure that the Installer is properly grounded while

working near the controller box area

2. Remove the front cover and dead front of the Panel board

/ Integrated switch board

3. Remove the center barrier by unscrewing the four mtg

screws which covers the line straps of each breaker.

4. Remove all the breakers on the side of back plane that

needs to be replaced

4a) Unscrew the breaker line strap mtg screw

4b) Hold the breaker and lift upwards & avoid it rotating

5. Unscrew the connecting cables ends to DB25 connecto

on the back plane assembly to be replaced.

6. Remove all the caplugs on the back plane assembly to be

replaced. Save caplugs for new back plane assembly.

7. Unscrew the hold down bracket mtg screw as per side

required on the controller box and then remove the hold

down bracket.

8. Unscrew Philips head screws holding the tray cover &

save them.

9. Remove the tray cover by lifting it.

10. Remove the back plane assembly.

Reinstallation instructions:

1. Locate the back plane assembly into the embossment

provided in panel plastic mounting base tray and

embossment provided on the top & bottom end caps.

2. Drop down the tray cover so as it snaps on all the plastic

tray snap tabs

3. Tighten all the Philips headed screws to torque of 10 lb-

inch to the tray cover so as to secure the back plane

firmly.

4. Assemble the hold down bracket and fastened it to the

controller box with hold down mtg screw & torque to 10 lb-

inch

5. Insert the caplug on the DB25 Pin connector of back plane

assembly on the other end.

6. Connect the DB25 connector cables by pressing the end

of the cables firmly and tighten two knurled screws o

cable end to torque of 5-10 lb-inch.

7. Install the breakers on the side on the replaced back plane

assembly. Breakers to be mounted straight down

7a) Align breaker line strap screw to bus bar strap mtg

hole and breaker connector to back plane connector.

7b) Push the breaker on to the plastic base mtg rail.

7c) Torque the line strap screw to 35 lb-inch.

8. Install the center barrier and tighten mtg the screws to hold

it firmly. Press this barrier on each breaker so it covers the

Line straps properly.

9. Install the dead front and front cover of the Panel board /

Integrated Switch board.

Series

Lighting Control Panel boards

Externally Mounted Controller Assembly

Controller

Box

DB25 Connector Cable

Back Plane Assy

Hold down

racket mt

screw

Hold down

Bracket

Snap

tab

Top

End Ca

Top end cap

Embossment

Plastic Base tray

Embossment

Bottom end cap

Embossment

Bottom

End Cap

Panel mtg

Base

Tra

cove

Back Plane:

ASRGLCPCB12

ASRGLCPCB18

ASRGLCPCB24

ASRGLCPCB30

ASRGLCPCB36

ASRGLCPCB42

Philips head

screws

Hold down bracket

screw

Hold down

Bracket

Replacement of Back plane assembly

Catalog No. Qty Description

SRGLCPCB1

1 12 Ckt Back Plane replacement kit

SRGLCPCB18 1 18 Ckt Back Plane replacement kit

SRGLCPCB24 1 24 Ckt Back Plane replacement kit

SRGLCPCB30 1 30 Ckt Back Plane replacement kit

SRGLCPCB36 1 36 Ckt Back Plane replacement kit

SRGLCPCB4

1 42 Ckt Back Plane re

lacement kit

WARNING: Danger of electrical shock or injury. Turn OFF power service to the line side of the panel board

or switchboard before working inside the equipment or removing any component. Equipment is to be

installed and maintained by properly trained and qualified personnel only.

Internally Mounted Controller Assembly

DEH41093 Installation Instructions R02

Line

Strap

Back Plane

Connecto

Breaker conn

ector

Breaker Installation

Center Barrier

GE Consumer & Industrial General Electric Company, Plainville, CT 06062



2004 General Electric Company DEH41093 R02

Inhaltsverzeichnis

Seite 1

Weitere Dokumente für Ausrüstung Ge-industrial-solutions A Series Lighting Control Panelboards Replacement

Um das Dokument anzuzeigen Ge-industrial-solutions A Series Lighting Control Panelboards Replacement Bedienungsanleitung

Ge-industrial-solutions A Series Lighting Control Panelboards Replacement Bedienungsanleitung (1 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Ge-industrial-solutions A Series Lighting Control Panelboards Replacement Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung Ge-industrial-solutions A Series Lighting Control Panelboards Replacement herunter. GE Industrial Solutions A Series Lighting Control Panelboards Replacement of Back plane User Manual Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Ausrüstung Ge-industrial-solutions A Series Lighting Control Panelboards Replacement

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Ge-industrial-solutions A Series Lighting Control Panelboards Replacement