Ge-industrial-solutions Q-Line 2-Pole GFCI Bedienungsanleitung PDF herunterladen

Attach on your Circuit Breaker Panel

Box or in an easily visible location.

While the GFCI circuit breaker affords a high degree of protection, there is no substitute for the

knowledge that electricity can be dangerous when carelessly handled or used without

reasonable caution.

When properly installed, each GFCI circuit breaker in this panel provides reliable overload and

short circuit protection PLUS protection from ground fault that might result from contact with a

“HOT” load wire and ground.

IMPORTANT NOTE – The GFCI circuit breakers will NOT reduce shock hazard if contact is

made between a “HOT” Load Wire and Neutral Wire or 2 “HOT” Load Wires.

Each GFCI circuit breaker is calibrated to trip with a ground current of at 5 milliamperes or more.

Since most persons can feel as little as 2 milliamperes, a distinct shock may be felt if the need

for personnel protection exists. However, the shock should be of such short duration that the

effects will be reduced to less than the normally dangerous level. However, persons with acute

heart problems or other conditions that can make a person particularly susceptible to electric

shock, may still be seriously injured.

GFCI GROUND FAULT

CIRCUIT INTERRUPTER BREAKER

TEST INSTRUCTIONS and RECORD CHART

Occupant’s General Information

FOR YOUR PROTECTION, PROPER INSTALLATION AND REGULAR

TESTING IS IMPORTANT. SEE OTHER SIDE FOR INSTRUCTIONS.

WARNING

A circuit breaker provides protection only to the circuit to which it

is connected. It does NOT provide protection to any other circuit.

GE Industrial Systems

_______________________________

General Electric Company

41 Woodford Ave, Plainville, CT 06062

GEZ-6331 R2 2001 General Electric Company

1 2

OCCUPANT 2

Inhaltsverzeichnis

Seite 1

Attach on your Circuit Breaker Panel Box or in an easily visible location.While the GFCI circuit breaker affords a high degree of protection, there is

Seite 2 - OCCUPANT

SEE OTHER SIDE FOR OCCUPANT ’S GENERAL INFORMATION1. With handle B in “ON” position, press PUSH TO TEST button A.2. Handle B should move to TRIP posit

Kommentare zu diesen Handbüchern

Keine Kommentare

Ge-industrial-solutions Q-Line 2-Pole GFCI Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung Ge-industrial-solutions Q-Line 2-Pole GFCI herunter. GE Industrial Solutions Q-Line 2-Pole GFCI User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Ge-industrial-solutions Q-Line 2-Pole GFCI