Ge-industrial-solutions EntelliGuard G Castell lock Kit Bedienungsanleitung PDF herunterladen

Introduction

Castel Lock kit:

The breaker key lock is an optional accessory,

which will keep the breaker in trip free state while

locked. Maximum 1 key of Castell type can be

used. All EntelliGuard Devices can be equipped

with one castell lock, that when fitted as

indicated.

Devices are found in two Variants:

1. Factory mounted mechanism:

The breaker/device is supplied off works with all

cams and screws allowing the user to mount a

separately acquired GE type lock kit.

2. Field mountable device:

A kit is supplied allowing the field mounting of the

locking mechanism and allowing the use of a lock

of the correct type purchased elsewhere

Catalog Number:

Catalog No

Description

GBCASR Castell Lock Kit

Use the following procedure to install the Key

Interlock Key accessory into the circuit breaker.

1. Turn the breaker off and discharge the closing

springs by depressing the OFF and ON buttons in

the sequence OFF-ON-OFF. Verify that the

breaker OFF-ON indicator shows OFF and that the

charge indicator shows DISCHARGE. If installing

in a draw-out type breaker remove breaker from

adaptor (cassette) before continuing.

DEH-41376 Installation Instructions

2. Turn the breaker off and discharge the closing

springs by depressing the OFF and ON buttons in

the sequence OFF-ON-OFF. Verify that the

breaker OFF-ON indicator shows OFF on a green

background and that the charge indicator shows

DISCHARGE on a white background. If installing

in a draw-out type breaker remove breaker from

adaptor (cassette) before continuing.

3. Loosen the 6 screws on front cover (fascia)

using a pozidrive screw driver as shown in Fig 1.B

Rotate the charging handle down and slide the

front cover over the handle to remove the front

cover as shown in Fig. 1.C

Castell lock Kit

EntelliGuard

G Circuit Breaker

Accessories

WARNING: Before installing any accessories, turn

the breaker OFF, disconnect it from all voltage

sources, and discharge the closing spings.

AVERTISSEMENT: Avant d’installer tout accessoire,

mettre le disjoncteur en position OFF, le

déconnecter de toute tension d’alimentation , et

décharger les resorts d’armement

Figure 1. (A) Front Cover (B) ScrewRemoval (C) Handle

Rotation

1 2 3

Inhaltsverzeichnis

Seite 1

Introduction Castel Lock kit: The breaker key lock is an optional accessory, which will keep the breaker in trip free state whil

Seite 2

4. Fix the cam with the Castell lock with the screw and nuts provided along with the kit as shown in fig 2. Fig 2. 5. Fix the Lock assy on the mo

Seite 3

Fig 5 Breaker key lock Operation: Use the following procedure to operate the padlock: 1. Depress the OFF pushbutton on the breaker front Fascia an

Kommentare zu diesen Handbüchern

Keine Kommentare

Ge-industrial-solutions EntelliGuard G Castell lock Kit Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung Ge-industrial-solutions EntelliGuard G Castell lock Kit herunter. GE Industrial Solutions EntelliGuard G Castell lock Kit User Manual [en] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Ge-industrial-solutions EntelliGuard G Castell lock Kit